Airmar P72—Portable Bracket Kit Manual de usuario descargar pdf

WARNING

NEVER USE SOLVENTS

Cleaners, gasoline, paint, sealants and other products may

contain strong solvents, such as acetone, which can attack many

plastics dramatically reducing their strength.

IMPORTANT

: Please read the instructions completely before

proceeding with the installation. These directions supersede

instructions in your instrument manual if they differ.

INSTALLATION INSTRUCTIONS

17-125-02 rev. 1 12/97

Portable Bracket Kit

Models: 33-161 for the P72 Transducer

33-076-01 for the P74 Transducer

Applications

• Mounts on any smooth, nearly vertical surface such as a boat

transom or canoe hull.

• Can be adjusted up to 20

• When mounted on the transom, the bracket will hold the transducer

in place at speeds up to 5kn (6MPH).

Materials Supplied

Upper bracket

Lower bracket

Curved spacer

Spring washer

Nyloc nut

Small screw: #10-32 x 3/4"

Suction cup

Large screw: 1/4-20 x 3/4"

Safety line

Tools Needed

Phillips screwdriver

Assembly

(see Figure 1)

1. To join the lower bracket to the upper bracket, insert the small screw

through the curved spacer, the lower bracket and the upper bracket.

Slide the spring washer and the Nyloc nut onto the screw with the

threaded metal side facing the bracket. Tighten the screw; then

reverse it 3/4 of a turn.

2. Place the small end of the suction cup in the circular recess in the

back of the upper bracket. Insert the large screw in the bracket and

tighten it to secure the suction cup in place.

3. Thread the safety line through the hole in the upper bracket. Tie a

knot in the end of the line to prevent it from being pulled out

(see Figure 2).

4. Compress the arms of the lower bracket and engage the tabs in the

transducer’s slots.

Figure 1. Assembly

upper bracket

safety line

tie-off hole

spring

Nyloc nut

suction

transducer

large screw

curved spacer

small screw

lower bracket

Portable Bracket

33-161 33-076-01

cup

washer

lower

bracket

arm

slots

spring

washer

Nyloc nut

suction

cup

lower

bracket

arm

with P72 with P74

with P72 Transducer

Kit 33-161

1 2

Indice de contenidos

Pagina 1 - INSTALLATION INSTRUCTIONS

WARNING : NEVER USE SOLVENTS ! Cleaners, gasoline, paint, sealants and other products maycontain strong solvents, such as acetone, which can attack

Pagina 2 - Installation

2 AIRMAR TECHNOLOGY CORPORATION35 Meadowbrook Drive, Milford, New Hampshire 03055-4618, USA Phone (603) 673-9570 Fax (603) 673-4624 Adjusti

Modelos relacionados P74—Portable Bracket Kit

Comentarios a estos manuales

Sin comentarios

Airmar P72—Portable Bracket Kit Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Airmar P72—Portable Bracket Kit. Airmar P72—Portable Bracket Kit User Manual Manual de usuario

Indice de contenidos

Modelos relacionados P74—Portable Bracket Kit

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Airmar P72—Portable Bracket Kit